Creative Design Concept

HOME     •     KOOL LINKS     •     PHOTOS     •     GALLERY


Design for additive manufacturing (DfAM or DFAM) is design for manufacturability as applied to additive manufacturing (AM). Design Engineers can create complex shapes and combine multiple parts into one in ways that were not cost-effective to produce using traditional machining or injection molding. Design for additive manufacturing (DfAM) requires a new way of looking at parts — redesigning them for print operations rather than adapting existing drawings. Common features like horizontal circular holes raise new design considerations, even as AM processes may reduce complexity in other areas. This concept emerges due to the enormous design freedom provided by AM technologies. To take full advantages of unique capabilities from AM processes, DFAM methods or tools are needed. What are the challenges in designing for Additive Manufacturing?

DFM for Additive Manufacturing (DFAM) is the Synthesis (các yếu tố) of shapes, sizes, geometric intermediate (meso) structures, and material compositions and microstructures (cấu trúc vi mô) to best utilize manufacturing process capabilities to achieve desired performance and other life-cycle objectives.

Design for minimum material that meets functional specs: By optimizing the design to put material just along the direction of force vectors ((lượng vừa có độ lớn vừa có hướng, chẳng hạn (như) tốc độ)), unnecessary wasted material that would be cut away with subtractive processes would not be needed in the first place. Use tools such as topology optimization and lattice (lưới, rèm; hàng rào mắt cáo) structures to make light and more efficient products.

Design for part consolidation: Converting an assembly of many smaller parts into a single, integrated, highly custom shape means that the entire piece is printed at once. Moreover, eliminating the need for assembly also eliminates the need for the inventory of many components (plus screws, bolts, nuts, washers, etc.) and the time, cost and potential errors involved in assembly steps such as bolting or welding, and maintenance.

Design for minimum material that meets manufacturing process specs: In Additive Manufacturing, large masses of material offer little engineering benefit and can induce considerable residual stresses. In turn they require more support structures to anchor and combat the added stresses. Also, they greatly increase print times and costs.

Design for improved function: For example, a cooling channel traditionally machined in a straight line in a tool for plastics injection molding can instead be a curved line that conforms to the shape of the end-part and provides faster and more even cooling.

Design for optimized material type: Explore the possibilities of 3D-printing a part in a material that is traditionally difficult to machine or form, to gain the benefits of better material properties such as thermal conductivity, malleability (tính dễ rền, tính dễ uốn) or strength. Consider not what material the part has been made of in the past, but rather what functions it must perform and then choose the most suitable available Additive Manufacturing material.

Design for optimized build-orientation and minimal support structures: Since many 3D-printed parts require support structures, even within powder-bed production (e.g., anchoring a metal part to its build plate to avoid warping, and supporting inclined sections to avoid drooping), material is added just for supports. It must be removed later, which can be a painstaking and time-consuming manual task. This post-processing can represent 70% of the part’s total cost. Shrewd (khôn, khôn ngoan; sắc, sắc sảo) part orientation can minimize the need for supports, while thoughtful part design can even swap out removable support structures with clever integrated elements and features.

Design for efficient and traceable workflow: Evaluate and specify all tasks involved in the production of an AM part, from pre-processing (nesting in the build-volume, defining build-parameter settings, etc.), to process monitoring, to post-processing (support removal, heat treatment, cleaning, UV-curing, surface treatment–whatever the particular process requires). Include recording parameters from the build process for later review or real-time control, for continuing process improvement and/or in support of relevant quality standards.

3D   P R I N T I N G   S T A R T I N G   F R O M   S C R A T C H

Engineers are looking at redesigning parts in an entirely new way, but the possibilities opened up using additive in the actual design of parts aren’t free by a long shot. There is a whole new set of design constraints that needs to be considered. Those constraints are numerous, but some of the most common elements that can lead to a failed build or add expense or time to the process include:

Layer Height: For processes where material is deposited in uniform layers, the height of layers affects build time and finish quality. Generally speaking, the thicker the layer, the faster the print, but the rougher the finish.

Wall Thickness: This can be a challenge for companies trying to migrate an existing design that was previously injection molded or machined to a 3D printing process. Very thin walls won’t survive the print process, while very thick structures will result in slow builds and higher costs. Hollow out or use a honeycomb fill for a thicker geometry, and even that still requires a large volume of material that may be cost-prohibitive. Wall thickness also affects material curing rates (with some processes) and part performance. If you design a hinge or a snap fit, the wall thicknesses around those features are going to affect how the part works.

Shrinkage/Warping: This can vary based on the material and printing process. As the material cools during the build, different features can warp or shrink, which causes cracking. Consistent wall thicknesses can help avoid this, as can part orientation on the print bed.

Support: Holes, overhangs, edges and other surfaces may require support structures during the build process that have to be removed in post-processing. Removal of the supports can affect the final finish quality. In addition, a design that requires too many supports can result in large amounts of expensive scrap material and slower build times. For some processes, water-soluble supports can be easily washed away in post-processing. Others require time-consuming machining or sanding. Designers can reduce the need for supports by avoiding sharp overhangs and angles. Design around self-supporting angles so you don’t need the supports running up the side of the part, that also improves build speeds and reduces cost, as well as shortens post-processing time.

Orientation: The orientation of the part in the print bed can have a significant effect on build times, the need for supports and even the strength of the final product. In Fused Deposition Modeling (FDM) and other processes, the layering of the material during printing can affect part strength. Parts under tension should be printed with the build direction parallel to the load. Orientation is an important topic designers should discuss with the manufacturing team. It’s often a surprise to customers because it can jack up the lead times and time-to-part, and also significantly affect the part price.

Variability: With the exception of expensive, high-end production systems, 3D printing still generates a lot of variability in quality. The same machine can give you different results depending on the time of day, the operator or the age of the material being used. Many AM systems can require a significant amount of maintenance and calibration to ensure part consistency. AM is not nearly as stable as injection molding, 3D printed parts produced a lot of variability and dimensionality, as well as differences in surface clarity of parts.

Holes: There are two types of challenges when it comes to holes. First, some print processes (like those using powder) require escape holes so that excess material can be evacuated during or after the build. The holes can be plugged or filled after printing if they affect the performance of appearance of the part. Putting holes all over a design doesn’t always appeal to people, but the risk of the print failing are usually the results. There are solutions, such as plugging the holes and sanding them. Quality is really the main driver.

Holes that are part of the actual design present different challenges. To print a circular, horizontal hole requires a significant amount of support material. Luckily, in the 3D printing world, holes no longer have to be circular. No matter how perfectly the machine can print, never trust a round hole to come off that machine, regardless of part orientation. Always reaming out the holes using conventional methods. Because of this, design undersized square holes that are rotated 45° instead of a hole round to eliminate the support inside that hole, which slows down the process and wastes material. Convert that to a square and rotate it, the software ignores it and doesn’t add a support. Once the build is done, that square hole is a perfect center point for the drill to ream out the hole.

Metal parts may need to be machined to obtain the correct surface finish, for example, or holes may need to be widened or drilled after the fact. The design may also need adjusted to accommodate those post-processing operations.

DE S I G N   F O R   A D D I T I V E   M A N U F A C T U R I N G   R U L E S

Design for Additive Manufacturing Requires a New Mindset. The adoption of 3D printing for manufacturing will require enterprise-level disruption and a new approach to product development. It will also require a lot of research and experimentation, as well as ongoing design for additive manufacturing education. Not every part or assembly is going to be a good candidate for AM, or may require multiprocess manufacturing that combines printing with machining or other approaches. Design Engineers will need to balance additive’s ability to reduce part complexity, weight and or cost against the inherent complexities that come with 3D printing. Consider the limitations and design requirements of the process, and adjust the design accordingly. Design Engineers will also need to be more collaboration among manufacturing, design and R&D engineers to move to a more well-connected R&D and production staff, or create more opportunities for production engineers to tinker and test new things. Creating innovation centers can allow for that experimentation.

Design for Additive Manufacturing Rules:

1. Should you be using Additive Manufacturing in the first place? All this subjects will be discuss later on after Synthesis Methods...

2. It doesn't cost any more to make your product beautiful. Add useful details, logos, part numbers, etc.

3. Always design with printed orientation in mind.

4. Design to avoid support material.

5. Avoid large masses of material. They cost a lot, cause residual stress and add little engineering value.

6. Fillet everything. Sharp corners cause stress concentrations, which increases the need for support.

D F A M — M E T H O D,   S Y S T E M   A N D   T E C H N O L O G I E S

The overall DFAM method begins with a conceptual design stage that is based on biomimicry (the imitation of natural biological designs or processes in engineering or invention). Conceptual Design Method The approach is an extension of the Pahl and Beitz design method. For some key subfunctions identified by the designer, a bio-inspired (dẫn đến) approach can be used to leverage “solutions” from nature. The method is called “reverse engineering biological systems” and is intended to help designers to develop solution and working principles by abstracting from the working principles used in biological system. Resulting “biological strategies” can be used as creative stimuli (stimulus; khuyến khích) in the search for engineering principles.

Four key research areas in the method for reverse engineering biological systems: Biological Systems Identification – Biological Representation – Biological Strategy Extraction – and Strategy Abstraction. The uniqueness of this method lies in the last three research areas, whereas biological (sinh vật học, như) system identification is currently being addressed by other researchers.

Key step in extracting biological strategies: The key is to develop a model of the biological system’s behavior. Such behavior models are critical in identifying engineering systems where the biological system may be applied, as well as in adapting the biological system to the engineering system. Using hierarchical Petri nets as the basic of the behavioral models, we believe that modeling the discrete (riêng biệt, riêng rẽ, rời rạc) physical states of the biological system as places and changes in these discrete states as transitions in the Petri net framework, while still holding the properties of reachability, liveness (tính sống động, lĩnh vực), and boundedness (giới hạn, hạn chế, hạn độ, ràng buộc).

We have applied the bio-inspired conceptual design method to the design of morphing (Một kỹ xảo hoạt hình bằng máy tính để vẽ xen các hình động) aircraft wing skins (based on the sea cucumber and human muscle) and of artificial kidneys (based on human kidneys). We concluded by stating that the output of conceptual design should be a detailed behavior model as well as working principles for each function in the behavior model. This information drives later design stages.

DFAM Method and System: The overall DFAM method consists of a traversal (chỗ giao nhau) of the frameworks (cơ cấu tổ chức, khuôn khổ, sườn, khung) in DFAM Framework from Function to Process, then back again to Behavior. The traversal from Function to Process can be called design, where functional requirements are mapped to properties and geometry that satisfy those requirements to structures and through process planning to arrive at a potential manufacturing process. Reverse direction, one can simulate the designed device and its manufacturing process to determine how well it satisfies the original requirements.

DFAM System and Overall Method shows the proposed DFAM system that embodies the method outlined above. To the right of illustrate image of DFMA System and Overal Method, the designer can define the DFAM synthesis problem, using an existing problem template if desired. For different problem types, different solution methods and algorithms (thuật toán, giải thuật) will be available. Analysis codes, including FEA (Finite Element Analysis), boundary element, and specialty codes, will be integrated to determine design behavior. In the middle of illustrate image, the heterogeneous (hỗn tạp, khác thể, không đồng nhất) solid modeler (HSM) is illustrated (heterogeneous denotes that material and other property information will be modeled). Libraries of materials and mesostructures enable rapid construction of design models. To the left of illustrate image, the manufacturing modules are shown. Both process planning and simulation modules will be included. After planning a manufacturing process, the idea is that the process will be simulated on the current design to determine the as-manufactured shapes, sizes, mesostructures, and microstructures. The as-manufactured model will then by analyzed to determine whether or not it actually meets design objectives.

Synthesis Methods: See Design for Additive Manufacturing by David W. Rosen - The George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology.


Site Designed by ME   •   2017 V i B a D i r e c t . c o m   •   De   C o l o u r e s   Studio   •   Contact Us